 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AN134 Application Note AES AND S/PDIF RECOMMENDED TRANSFORMERS Transformers are used in professional digital audio interfaces to provide high-frequency rejection, impedance matching, DC blocking and short-circuit protection. Due to the specialized needs of this application several manufacturers have designed transformers specifcally for AES and S/PDIF circuits. The transformer used in the professional interface should be capable of operation from 3.6 to 12.8 MHz, which is the audio data rate of 28 kHz to 100 kHz after biphase-mark encoding. Transformers provide isolation from ground loop, 60 Hz noise, and common mode noise and interference. One of the important considerations when choosing transformers is minimizing shunt capacitance between primary and secondary windings. The higher the shunt capacitance, the lower the isolation between primary and secondary and the more coupling that can occur for high frequency energy. This energy appears in the form of common mode noise on the receive side ground and has the potential to degrade analog performance. Therefore, shielded transformers optimized for minimum primary to secondary capacitance may be desirable. The following are a few typical transformers. Please contact these manufacturers directly for more detailed information: Pulse Engineering Telecom Products Group PO Box 12235 San Diego, CA 92110 (619) 674-8100 (619) 674-8262 fax http://www.pulseeng.com Part Number: PE65612 Schott Corporation 1000 Parkers Lane Rd. Wayzata, MN 55391 (612) 475-1173 http://www.schottcorp.com Scientific Conversion Inc. 42 Truman Dr. Novato, CA 94947 (415) 892-2323 (415) 892-2321 fax email: jonpaul@ix.netcom.com Many other types available. Contact Scientific Conversion for catalog. VITEC 4027 Clipper Court Fremont, CA 94538 (510) 353-9260 (510) 353-9836 fax http://www.VitecCorp.com email: Fred.Hegwood@VitecCorp.com Cirrus Logic, Inc. P.O. Box 17847, Austin, Texas 78760 (512) 445 7222 FAX: (512) 445 7581 http://www.crystal.com Copyright (c) Cirrus Logic, Inc. 1999 (All Rights Reserved) APR `99 AN134REV2 1 AN134 Manufacturer Pulse Engineering Schott Corporation Part Number PE65612 67125450 67128990 67129000 67129600 Scientific Conversion Inc. SC916-01 SC944-05 SC937-02 SC979-03 VITEC 67Z6700 lower cost surface mount single shield 1:1 shielded, 12.5 mm thru hole 2:1 shielded, 12.5 mm thru hole 1:1 shielded or 2:1 unshielded 9.5 x 5 mm SMD SO-8, for AES/EBU, AES-3, S/PDIF 1:1 unshielded 96 kHz 9.5 x 5 mm SMD SO-8 for 2x sampling and DVD Comments 2 AN134REV2 |
Price & Availability of AN134
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |